· · 5 min read

Wood Chipper vs Tub Grinder: 7 Key Differences

Wood chipper vs tub grinder comes down to output and scale: chippers cut clean branches and logs into uniform 15 to 45 mm chips at 2 to 30 tons per hour, while tub grinders hammer bulky storm debris and whole trees into 25 to 100 mm mulch at 30 to 100 tons per hour. Chippers cost $25000 to $180000, tub grinders $280000 to $650000, and running costs differ by $6 to $12 per ton. This wood chipper vs tub grinder comparison covers 7 differences so you buy once.

Key Takeaways

  • Chippers use knives for clean uniform chips; tub grinders use hammers for bulky contaminated debris.
  • Throughput barely overlaps: 2 to 30 T/h for chippers versus 30 to 100 T/h for tub grinders.
  • Chip uniformity favors chippers at fines below 5 percent versus 10 to 20 percent for tub grinders.
  • Purchase gap is 5 to 10 times; per-ton cost favors chippers under 200 tons per week and tubs above it.
  • Choose chipper for arborist chips and pellet feed, tub grinder for land clearing and storm cleanup.

How Does Each Machine Work?

A wood chipper pulls branches and logs through infeed rollers past 2 to 8 knives on a drum or disc spinning at 400 to 1000 rpm. Clean 6 to 20 in wood becomes uniform chips in one pass, with screens or anvil gaps setting 15 to 45 mm size. Knife changes take 1 to 2 hours with 2 people every 100 to 300 hours.

A tub grinder drops whole trees and storm piles into a 10 to 14 ft rotating tub feeding a hammermill with 20 to 48 hammers. It tolerates dirt, nails, and odd shapes that would destroy chipper knives in minutes. Screen changes take 30 to 60 minutes across 2 to 6 segments. Compare both layouts on our wood chipper page and tub grinder page.

What Are the 7 Key Differences?

FactorWood ChipperTub Grinder
Cutting system2 to 8 knives, drum or disc20 to 48 hammers, hammermill
Best materialClean branches, logs, palletsStorm debris, whole trees, stumps
Throughput2 to 30 T/h30 to 100 T/h
Output size15 to 45 mm, fines below 5 percent25 to 100 mm, fines 10 to 20 percent
Contamination toleranceLow — nails destroy knives fastHigh — handles dirt and metal mix
Power band55 to 400 kW350 to 800 kW
Price band$25000 to $180000$280000 to $650000

The crossover sits near 200 to 300 tons per week of clean logs: below it a 15 in chipper at $80000 wins, above it a tub grinder saves 1 to 2 labor positions. Mixed yards processing 100 to 400 tons often keep both — chipper for premium chips, tub for surge weeks.

How Do Costs Compare?

Five cost lines decide beyond sticker price:

  • Purchase price — a 12 in chipper at $60000 to $90000 versus a 500 HP tub at $380000 to $480000.
  • Wear parts — knives at $2 to $4 per ton for chippers versus hammers and screens at $5 to $10 per ton for tubs.
  • Fuel — chippers burn 8 to 25 liters per hour ($12 to $20 per ton at small scale); tubs burn 25 to 55 liters per hour ($4 to $9 per ton at scale).
  • Labor — 1 to 2 people feed a chipper at 5 to 15 T/h; 2 people run a tub at 40 to 80 T/h, halving labor per ton.
  • Downtime — knife damage idles chippers 1 to 2 days; tub hammer swaps take 4 to 8 hours with stocked sets.

Factory-direct machines from WeiDong Machinery land 20 to 40 percent below dealer prices in both classes, and standard models ship in 15 to 30 days. Get a per-ton quote from our sales team before ruling either out.

Which Fits Your Material?

Apply these 4 rules from 200-plus installations:

  1. Arborist and landscaping under 100 tons per week — wood chipper at 6 to 12 in feed and 2 to 10 T/h.
  2. Pallet recycling and mulch at 100 to 300 tons — 15 in chipper for premium chips plus tub hire for surge months.
  3. Land clearing and storm debris over 300 tons — tub grinder swallowing 30 ft trees whole without pre-cutting.
  4. Biomass fuel contracts — chipper for 20 to 30 mm pellet feed with fines below 5 percent; tub for 30 to 80 mm boiler fuel.

Contamination is the tiebreaker: more than 2 percent soil or any nails pushes the pick to a tub grinder or a shredder even at small scale. Send photos and our engineers reply within 1 business day.

Frequently Asked Questions

What is the difference between wood chipper and tub grinder?

A chipper cuts clean wood with knives into uniform 15 to 45 mm chips at 2 to 30 T/h, while a tub grinder hammers bulky debris with 20 to 48 hammers into 25 to 100 mm product at 30 to 100 T/h.

Which one should I buy for a tree service?

Buy a 12 to 15 in wood chipper at 150 to 300 kW for tree-service volumes under 150 tons per week. Add tub-grinder hire or a second machine only when storm weeks exceed 300 tons.

How much do they cost?

Chippers cost $25000 to $180000 new and tub grinders $280000 to $650000 new, with used units 35 to 60 percent cheaper at 2500 to 4500 hours. Per-ton running costs run $14 to $24 for small chippers and $8 to $15 for tubs.

Can a tub grinder replace a chipper?

Only for coarse mulch and biomass — tub fines of 10 to 20 percent fail pellet and premium-chip specs demanding under 5 percent fines. Keep a chipper for uniform markets.

Next Step

Send WeiDong Machinery your material photos, weekly tonnage, and target chip size for a chipper-versus-tub recommendation with ex-works prices for both. Compare the wood chipper lineup and tub grinder lineup, or message our sales team — replies arrive within one business day.

Keep reading