· · 6 min read
Wood Chipper Prices 2026: New Machine Cost Guide
A wood chipper price depends mainly on throughput capacity, feed opening size and power type. Entry-level 6-inch chippers start near $8,000, mid-range 12 to 15 inch machines sit between $25,000 and $70,000, and industrial 20-inch-plus chippers cost $100,000 to $180,000 or more. This 2026 cost guide breaks down each price tier, explains the 5 factors that move the number, and shows how factory-direct buying from WeiDong Machinery changes your total wood chipper price.
Key Takeaways
- Entry 6-inch chippers: $8,000 to $20,000 for landscaping crews and small farms.
- Mid-range 12 to 15 inch chippers: $25,000 to $70,000 — the most common band for municipalities and recycling yards.
- Industrial 20-inch-plus chippers: $100,000 to $180,000 for biomass plants and storm-debris contractors.
- Capacity, power unit, feed system, mobility and screen specification explain nearly all price differences.
- Factory-direct purchase typically cuts 20 to 40 percent off dealer-listed prices for equal capacity.
Wood Chipper Price by Tier
| Tier | Feed opening | Throughput | Price range | Typical buyer |
|---|---|---|---|---|
| Entry | 6 in / 150 mm | 2 to 6 T/h | $8,000 – $20,000 | Landscapers, orchards |
| Mid-range | 12 to 15 in / 300 to 380 mm | 10 to 25 T/h | $25,000 – $70,000 | Municipalities, pallet yards |
| Industrial | 20 in / 500 mm and up | 30 to 60+ T/h | $100,000 – $180,000 | Biomass plants, sawmills |
Prices above cover standard diesel drum chippers with powered feed. Budget container freight separately: Renqiu to Rotterdam or Houston adds $2,500 to $5,000 per 40-foot box holding 1 mid-range or 2 compact machines. Electric-drive versions cost 5 to 10 percent less upfront where a 100 to 400 kW supply is available, and cut energy cost per ton by roughly 30 percent. Compare model-level figures on our wood chipper lineup before requesting a formal quote.
What Drives Wood Chipper Price?
Five factors explain most of the spread between two machines with the same feed opening:
- Throughput capacity — each step up in hourly tonnage needs a larger rotor, heavier chassis and bigger engine; price rises roughly with the square of rated output.
- Power unit — diesel engines from 74 kW to 400+ kW add $5,000 to $40,000; tracked or high-horsepower packages sit at the top of that band.
- Feed system — roller or grapple auto-feed adds $8,000 to $25,000 over manual gravity feed but doubles effective output per operator.
- Mobility — tracked undercarriage for soft ground adds 10 to 15 percent over wheel-mounted units, while trailer-mounted road-legal versions add $3,000 to $8,000.
- Output specification — interchangeable screens for 15, 30 or 45 mm chips plus hardened anvils add $2,000 to $6,000 but unlock fuel-grade contracts worth $10 to $25 more per ton.
A common mistake is oversizing by 50 percent "for growth" — the larger engine burns 20 to 30 percent more diesel per ton at part load. Size to your proven weekly volume plus a 15 to 20 percent margin instead.
Should You Buy New or Used?
Used chippers list at 40 to 65 percent of new price for machines with 2,000 to 5,000 operating hours, which looks attractive until wear costs arrive. Budget these realities before choosing:
- A full knife, anvil and screen refresh costs $3,000 to $12,000 depending on rotor size.
- Rotor bearings and feed-roller rebuilds add $2,000 to $8,000 on machines past 4,000 hours.
- No-name used units often lack screen sets, forcing $2,000 to $6,000 in new tooling before fuel-grade work.
New machines make sense above 300 operating hours per year: warranty coverage runs 12 months or 2,000 hours, fuel efficiency is 10 to 15 percent better with current engine calibrations, and lead time from WeiDong Machinery is only 15 to 30 days. Below 100 hours per year, renting at $400 to $900 per day usually beats ownership. Our sales team can model buy-versus-rent against your tonnage in one business day.
How Can Factory-Direct Buying Lower Your Wood Chipper Price?
Dealer-listed machines stack importer margin, freight markup and showroom overhead — typically 20 to 40 percent above ex-works cost. Buying factory-direct from WeiDong Machinery in Renqiu, Hebei removes those layers: you pay the factory price plus transparent freight, and you configure screens, feed and power directly with the engineers who build the machine. A mid-range 12-inch chipper quoted at $58,000 through a dealer channel, for example, commonly lands between $35,000 and $46,000 factory-direct.
Three extras come standard with direct orders that dealers charge separately for:
- Export packing and container loading, included on all 15 to 30 day standard shipments.
- A spare knife set and first-service filter kit valued at $800 to $1,500.
- English manuals plus video commissioning support, cutting startup time to 1 or 2 days.
For contaminated feed such as demolition timber, check our tub grinders and horizontal grinders — the same factory-direct savings apply across all 5 product lines.
Frequently Asked Questions
How much does a wood chipper cost for commercial use?
Commercial 12 to 15 inch chippers cost $25,000 to $70,000 new and handle 10 to 25 T/h. That band covers most municipal, pallet-yard and biomass workloads at the lowest cost per ton.
What drives wood chipper price more: size or power?
Throughput capacity drives price most, followed by the diesel power unit at $5,000 to $40,000. Feed system and tracked mobility each add 10 to 25 percent on top of the base machine.
Is a used wood chipper worth the lower price?
A used chipper at 40 to 65 percent of new price pays off below 300 hours per year if rotor hours are under 4,000 and knives, screens and bearings check out. Above that workload, new machines win on fuel efficiency and warranty.
How much does it cost per year to run a wood chipper?
Budget 3 to 6 percent of purchase price for wear parts plus diesel at $12 to $20 per ton produced. A $50,000 mid-range chipper at 1,500 hours per year costs roughly $20,000 to $25,000 annually all-in.
How long does factory-direct delivery take?
Standard models ship in 15 to 30 days with export packing included, plus 25 to 40 days of ocean freight depending on route. Ordering wear kits with the machine saves 15 to 20 percent versus piecemeal spares later.
Next Step
Send your material type and target tonnage to WeiDong Machinery and receive a matched model with an ex-works wood chipper price within one business day. Start at the wood chipper lineup or contact our sales team directly.