· · 5 min read
Tub Grinder Prices 2026: New Machine Cost Guide
A new tub grinder price in 2026 runs from roughly $180,000 for compact 300 HP units to over $800,000 for industrial 1,000 HP machines, with mid-range 400 to 600 HP models — the volume sellers — landing between $250,000 and $550,000. Throughput capacity, engine power, mobility, and screen and hammer configuration explain nearly all of the spread. This tub grinder price guide breaks down each cost tier, the factors that move quotes, new-versus-used math, and how factory-direct buying from WeiDong Machinery changes the total.
Key Takeaways
- Compact 300–400 HP tub grinders: $180,000 to $300,000 at 20 to 35 T/h.
- Mid-range 400–600 HP units: $250,000 to $550,000 at 35 to 55 T/h — the most common band.
- Industrial 600–1,000+ HP machines: $550,000 to $800,000+ at 55 to 80+ T/h.
- Power, throughput, tracked versus wheeled mobility, and wear-part configuration drive 90 percent of price variance.
- Factory-direct purchase from WeiDong Machinery typically saves 20 to 40 percent versus dealer-listed equivalents.
Tub Grinder Cost by Tier
| Tier | Power | Throughput | Price range | Typical buyer |
|---|---|---|---|---|
| Compact | 300 – 400 HP / 220 – 300 kW | 20 – 35 T/h | $180,000 – $300,000 | Municipal yards, small mulch producers |
| Mid-range | 400 – 600 HP / 300 – 450 kW | 35 – 55 T/h | $250,000 – $550,000 | Clearing contractors, recyclers |
| Industrial | 600 – 1,000+ HP / 450 – 750+ kW | 55 – 80+ T/h | $550,000 – $800,000+ | Biomass plants, national contractors |
Quotes above cover diesel-powered grapple-fed machines with a standard screen set and stacking conveyor. Tracked undercarriage adds 10 to 15 percent; remote control, magnetic separation, and dust suppression add $15,000 to $45,000 combined. Check current model-level pricing on our tub grinder lineup.
What Drives the Tub Grinder Price?
Six factors explain almost every quote difference:
- Throughput capacity — each step up in tons per hour demands a bigger rotor, heavier tub, and larger engine; price scales roughly with the square of throughput.
- Engine power and brand — the jump from 400 to 600 HP alone adds $60,000 to $120,000, and premium engine badges add 5 to 10 percent over standard options.
- Mobility — tracked machines cost 10 to 15 percent more than wheel-mounted equivalents but eliminate loader repositioning on soft ground.
- Hammers, screens, and anvils — carbide-tipped hammer sets and multi-screen packages add $10,000 to $30,000 while doubling service intervals.
- Discharge and separation — longer stacking conveyors, magnetic head pulleys for nail removal, and dust control add $15,000 to $45,000.
- Controls and compliance — radio remote, telematics, and Tier 4 Final / Stage V emissions packages add $8,000 to $25,000 depending on market.
Fuel and wear parts dominate lifetime cost: budget $18 to $30 per engine hour for diesel at full load plus $4 to $9 per ton for hammers, screens, and teeth.
How Much Does a Used Tub Grinder Cost?
Used machines trade at 45 to 65 percent of new depending on hours and records:
- Under 2,000 hours: 65 to 75 percent of new — nearly new, often ex-rental fleet with service logs.
- 2,000 to 4,000 hours: 50 to 65 percent of new — the value band, but reserve $15,000 to $40,000 for hammers, bearings, and clutch work.
- 4,000 to 6,000 hours: 40 to 50 percent of new — only with documented rebuilds; inspect the rotor, tub floor, and engine blow-by carefully.
- Over 6,000 hours: 30 to 40 percent of new — parts-donor pricing unless a certified rebuild backs it.
A used mid-range unit at $220,000 with 3,000 hours plus $30,000 in reconditioning totals $250,000 against $380,000 new — a real saving, but with zero warranty and 8 to 12 percent higher downtime. When the used all-in price passes 65 percent of new, new machines win. Our used machinery inspection principles apply directly to tub grinders.
Factory-Direct Savings From WeiDong Machinery
Dealer-listed tub grinders carry importer margin, freight markup, and showroom overhead. Buying factory-direct from WeiDong Machinery in Renqiu, Hebei removes those layers: equivalent capacity classes land 20 to 40 percent below dealer quotes, with direct engineering support for screen, hammer, and feed configuration. Standard models ship in 15 to 30 days with export packing included, and every machine carries a full factory warranty with video-guided commissioning. Send your material type and target tonnage to our sales team for a model recommendation and ex-works price within one business day.
Frequently Asked Questions
How much does a tub grinder cost?
New tub grinders cost $180,000 to over $800,000: compact units $180,000 to $300,000, mid-range $250,000 to $550,000, and industrial machines $550,000 to $800,000+. Used units run 40 to 65 percent of new depending on hours.
What drives tub grinder price most?
Throughput capacity and engine power drive most of the price, followed by tracked versus wheeled mobility (10 to 15 percent premium), wear-part configuration, discharge options, and emissions compliance packages.
Is a factory-direct tub grinder cheaper?
Yes. Factory-direct tub grinders from WeiDong Machinery typically cost 20 to 40 percent less than dealer-listed equivalents because importer margin and freight markup are removed, and engineering support comes direct from the factory.
New or used tub grinder — which is better value?
Buy used when the all-in cost (price plus $15,000 to $40,000 reconditioning) stays under 60 percent of new and hours sit below 4,000 with records. Otherwise new wins on warranty, uptime, and cost per ton.